Su carrito

0 producto(s)

xNo tiene artículos en su carrito de compras.

Muelles de Valvula y Copelas (titanio) Skunk2 Racing Alpha Series (Honda K20/K24 01-12)

Aplicaciones en Vehículos

See Vehicle Fitment Tab & Notes

Stock: Stock

€ 466,00
Envío por:ups
Haga clic en la imagen para ampliar

Detalles

Skunk2 Valve Spring and Titanium Retainer Kit for Honda K-Series 01-12
344-05-1410

NOTE:Engines originally equipped with single valve springs must use K-Series Spring Base Kit, available separately.
- Seat Pressure: 60 lbs at 1.600”
- Open Pressure: 220 lbs at 1.100”
- Coil Bind: 1.000”
- Not compatible with Pro Series Camshafts.
Please note: When using Skunk2 Titanium Retainers (P/N 308-05-0410 or 308-05-1410) on 2004 and newer engines, pre-2004 keepers (cotters) must be used (Honda P/N 14781-PR7-A01). Pre-2004 keepers can be identified by the absence of marks along the top edge (2004 and newer keepers feature laser-etched marks along the top edge). For applications where 2004 and newer keepers are used, Skunk2 Titanium Retainers (P/N 308-05-0410 or 308-05-1410) must be used. Proper retainer/keeper selection is important due to varying angle ratios between earlier and later keeper designs. Use of improper retainers and/or keepers may result in potential engine damage.

Skunk2 is proud to introduce its Alpha Valve Spring and Titanium Retainer Kit for Honda’s K-series engines. Each kit includes Skunk2’s high-quality dual valve springs and race-proven titanium retainers that are the result of nearly two decades of racing and engine building experience.
Each Alpha Valve Spring is manufactured exclusively from super-clean, chrome-silicone wire milled in Japan. By using inner and outer springs mated together through a slight interference fit and with differing frequencies, Alpha Valve Springs are able to prevent valve float and maintain valvetrain stability at engine speeds in excess of 10,000 rpm.
Skunk2’s industry-leading Alpha Titanium Retainers are designed to significantly reduce valvetrain mass, resulting in more horsepower and improved valvetrain stability. Similar to Skunk2’s already popular Pro Series Titanium Retainers, Alpha Titanium Retainers feature radius-cut edges for additional rocker arm clearance and reduced weight, strategically positioned lightening grooves, and reduced overall heights for better valve seal clearance and even further weight reduction.
Alpha Titanium Retainers are manufactured using the latest 3D CAD (Computer Aided Design) and FEA (Finite Element Analysis) to ensure that each is optimized for strength as well as for reduced weight. Skunk2 engineers then test and prove their designs on the engine dyno as well as the race track. Once approved for manufacturing, only medical-grade titanium that’s been ultrasonically inspected and certified is used. Following CNC machining, each retainer is then individually inspected to ensure proper hole diameter, taper, and that each are free from machining defects to ensure proper installed valve spring heights and pressures. Finally, each retainer is serialized for your protection, including valuable information, like material batch specifics as well as production and inspection dates.
Skunk2 designs, develops, and tests its entire valvetrain lineup in-house to ensure superior quality and maximum performance gains. During development, each valvetrain component is tested both on the dyno and the road, including 11,000 rpm drag racing engines and 17,000 rpm superbikes. Manufactured from the best materials available, Skunk2 valvetrain components provide exceptional performance, reliability, and quality and remain standard-issue on each Skunk2 vehicle that we build and support.

Información adicional

Código Del Producto 344-05-1410
PVP € 466,00
Par máximo (Nm) No
Compression Ratio No
Contenido No
Fabricante Skunk2 Racing
Bore Size No
Sitio Web del Fabricante Skunk2 Website
Engine Type No
Size (inch) No
Manufacturer Logo Skunk2 Racing Logo
Coloros No
Material No
Rigidez de Uretano No
Approvals No
TÜV Approval No
Config Color No
Diámetro No
Side left/right No
Anchura No
Longitud No
Altura No

This product fits on the following car models:

Honda Accord 2003-2005 4-door sedan 2.0i (K20A6 - CL7)
Honda Accord 2003-2005 4-door sedan 2.4i (K24A3 - CL9)
Honda Accord 2005-2008 4-door sedan 2.0i Comfort (K20A6)
Honda Accord 2005-2008 4-door sedan 2.0i Sport (K20A6)
Honda Accord 2005-2008 4-door sedan 2.0i Business Mode (K20A6)
Honda Accord 2005-2008 4-door sedan 2.0i Executive (K20A6)
Honda Accord 2005-2008 4-door sedan 2.4i Type S (K24A3)
Honda Accord 2005-2008 4-door sedan 2.4i Executive (K24A)
Honda Accord 2008-2010 4-door sedan 2.4i Executive (K24A)
Honda Accord 2003-2005 5-door stationwagon 2.0i Comfort (K20A6)
Honda Accord 2003-2005 5-door stationwagon 2.0i Sport (K20A6)
Honda Accord 2003-2005 5-door stationwagon 2.0i Executive (K20A6)
Honda Accord 2003-2005 5-door stationwagon 2.4i Type S (K24A3)
Honda Accord 2003-2005 5-door stationwagon 2.4i Executive (K24A)
Honda Accord 2005-2008 5-door stationwagon 2.0i Comfort (K20A6)
Honda Accord 2005-2008 5-door stationwagon 2.0i Sport (K20A6)
Honda Accord 2005-2008 5-door stationwagon 2.0i Business Mode (K20A6)
Honda Accord 2005-2008 5-door stationwagon 2.0i Executive (K20A6)
Honda Accord 2005-2008 5-door stationwagon 2.4i Type S (K24A3)
Honda Accord 2005-2008 5-door stationwagon 2.4i Executive (K24A)
Honda Accord 2008-2010 5-door stationwagon 2.4i Executive (K24A)
Honda Civic 2001-2003 3-door hatchback 2.0i Type-R (K20A2 - EP3)
Honda Civic 2003-2005 3-door hatchback 2.0i Type-R (K20A2 - EP3)
Honda Civic 2008-2012 4-door sedan 2.0i Type-R (K20A - FD2)
Honda Civic 2007-2012 3-door hatchback 2.0i Type R (K20Z4 - FN2)
Honda Integra 2001-2006 2-door coupe 2.0i Type-R (K20A - DC5)
Honda Element 2003-2006 5-door SUV 2.4i I-VTEC DX (K24A4)
Honda Element 2003-2006 5-door SUV 2.4i I-VTEC EX (K24A4)
Honda Element 2003-2006 5-door SUV 2.4i I-VTEC SC (K24A4)

Stock

Nuestro indicador de stock es correcto en el 90%, consúltanos para estar seguro del stock!.

Envios

Enviamos por UPS a la mayoria de destinos, consúltanos cualquier duda!.

Garantías de los Productos

Todos los productos con defectos de fabricación han de ser enviados a revisión a su fabricante.

Todos nuestros productos tienen un año de garantia (excepto M&H Tires, ACT Clutches & Exedy) siempre cumpliendo con los términos de cada fabricante.

Si tiene alguna duda contacte con nosotros en info@kdperformance.com