Energy Suspension Hyper-Flex System
16.18102

Front Control arm bushings - Part Number 16.3103

- 4 x 2271 lower control arm pivot bushing
- 2 x 15.10.243.39 (.750” x .406” x 2.038” sleeve)
- 2 x 3281 lower control arm pivot bushing.4 - 3280 upper control arm pivot bushing
- 4 x 15.10.299.39 (.750” x .406” x 1.486” sleeve)

Rear end control arm bushings - Part Number 16.3104
(89-91 Civic/CRX with cast iron control arms).

- 8 x 2269 lower control arm pivot bushing
- 4 x 3283 lower control arm pivot bushing
- 4 x 15.10.279.39 (.750” x .406” x 1.960” sleeve)

Rear end control arm bushings - Part Number 16.3111
(88 Civic/CRX with stamped steel control arms).

- 4 x 3321 small bushing.
- 4 x 3322 big bushing.
- 4 x 15.10.279.39 (.Use sleeves from set # 16.3104)

Front strut rod bushings - Part Number 16.7102

- 4 x 7095 strut rod bushing (Install with P/N facing each other)

Front Shock Mount Bushings - Part Number 16.8102

- 4 x 2272 lower control arm shock mount
- 4 - 8096 upper shock mount(use O.E. sleeve)
- 2 x 15.245 (3/4”O.D. x .480”I.D. x 1.960” sleeve)

Rear shock mount bushings - Part Number 16.8103

- 4 x 2270 lower control arm shock mount.
- 4 x 8096 upper shock mount.
- 2 x 15.10.279.39 (.750” x .406” x 1.960” sleeve)

Front Sway Bar Endlinks - Part Number 16.8104

- 8 x 8072 endlink bushing.
- 2 x 15.10.226.39 (.562” x .375” x .400” sleeve)
- 8 x 15.03.03.40 cupped washer.
- 2 x 15.05.28.39 (3/8”-16 x 3-3/4” bolt)
- 2 x 15.07.01.40 (3/8”-16 nylock nut)

Shifter stabilizer bushings - Part Number 16.1102

- 1 x 1033 (mounts near shifter)
- 2 x 2277 (mounts at the transmission)
- 1 x 15.10.247.39 (.750” x 8mm x 1.200” sleeve)

Rack and pinion bushings - Part Number 16.10101

- 4 x 10022 drivers side (all models)
- 1 x 10023 passenger side
- 1 x 17153 installation instructions

Front balljoint boots - Part Number 16.13101

- 2 x 13001 (lower balljoint)
- 2 x 13003 (upper balljoint)

Tie rod boots - Part Number 9.13103

- 2 x 13003 tie rod boots

Formula 5 Prelube.

- 6 x 9.11101 grease tubs.