Su carrito

0 producto(s)

xNo tiene artículos en su carrito de compras.

Controlador de Mezcla y Encendido AEM F/IC 6 (Universal)

Aplicaciones en Vehículos

See Vehicle Fitment Tab

Stock: 1-5 Dias Laborables

€ 527,00
Envío por:ups
Haga clic en la imagen para ampliar

Detalles

PLUG & PLAY F/IC KEY FEATURES
    • Plugs directly into the factory harness. No rewiring necessary.
    • Includes start up calibrations.
    • Enables MAF-clamping/ recalibration.
    • Runs in conjunction with factory ECU. CAN-BUS not affected.
    • Among the only piggyback systems which can decrease pulse-width, allowing larger aftermarket injectors while maintaining proper air/fuel ratios.
    • 64kb of internal data logging.

F/IC OVERVIEW

The AEM F/IC is an economical solution for controlling fuel and ignition on vehicles that do not require stand-alone engine management, including variable cam timing engines like VTEC, VVTi and MiVEC.The F/IC gives users with OBD-II race vehicles and non-factory forced induction systems the ability to retard ignition and deliver accurate amounts of fuel without the need for outdated FMUs or “boost hiding” controllers. This system works parallel to the factory ECU preventing tuning limitations due to complex factory timing patterns. 21x17 maps with configurable load and RPM breakpoints are easily accessed with the F/IC's Windows-based tuning software. The F/IC draws power from PC USB interface for quick and easy calibration changes.

PRECISE FUEL DELIVERY

The F/IC intercepts the signal to the stock injectors, allowing the user to modify pulse-width by +/-100%. The F/IC is among the only piggy-back systems that can decrease injector pulse-width, allowing the user to drive larger aftermarket injectors* while still maintaining proper air / fuel ratios. This powerful system can also tap into the factory injector signal and work independently to drive up to six (6) additional injectors.

TIMING RETARD CONTROL

The F/IC can retard timing from the factory system based on engine RPM and load inputs. This is achieved by intercepting and delaying the outputs from the cam and crank position sensors to the engine- with no adverse affect on applications equipped with variable cam timing.

SENSOR CALIBRATION & CONTROL

The F/IC can also be used to recalibrate / clamp the MAF sensor, eliminating common problems with non-boosted factory MAFs. The on-board MAP sensor allows for proper fueling in boosted conditions.

CAN-BUS SYSTEMS NOT AFFECTED

Since the F/IC works in conjunction with the factory ECU, late model-vehicles equipped with a CAN-BUS system retain functionality of climate controls, dash and other components on the network.


PRODUCT COMPARISON : F/IC-6 AND F/IC-8

FEATURESF/IC-6F/IC-8
Injector Channels68
Advanced Injector Load Simulation & FilteringNoYes
Timing Channels (Cam + Crank)35
High/Low Voltage Selectable MAG-Driver OutputsNoYes
TPS InputYesYes
MAP Sensor (Onboard)YesYes
MAP (0-5v Intercept)YesYes
MAF (0-5v Intercept)YesYes
Frequency Based Flow Meter SupportNoYes*
Speedometer RecalibratorNoYes*
o2 Sensor RemappingYesYes
External AFR InputYesYes
Generic 0-5v Remappers22
Boost Controller (Requires AEM 30-2400 Solenoid)NoYes
IAT Logging InputNoYes
PC DataloggingYesYes
Internal Logging Memory64 Kb2 Mb
VTEC Output/Control/+12V Switched OutputYesYes


*Can use either a frequency based flow meter sensor or the speedometer remapper but not both at the same time

Información adicional

Código Del Producto 30-1910
PVP € 527,00
Fabricante AEM Electronics
Sitio Web del Fabricante AEM 30-1910 Product page
Manufacturer Logo Advanced Engine Management (AEM) Logo

This product fits on the following car models:

This is an universal product.
Please note that modifications might be needed in order to fit this part in your specific car.

Stock

Nuestro indicador de stock es correcto en el 90%, consúltanos para estar seguro del stock!.

Envios

Enviamos por UPS a la mayoria de destinos, consúltanos cualquier duda!.

Garantías de los Productos

Todos los productos con defectos de fabricación han de ser enviados a revisión a su fabricante.

Todos nuestros productos tienen un año de garantia (excepto M&H Tires, ACT Clutches & Exedy) siempre cumpliendo con los términos de cada fabricante.

Si tiene alguna duda contacte con nosotros en info@kdperformance.com

  Loading...